INFORMATION ARDEX R 2 E
ARDEX R 2 E is a two-component solvent-free epoxy resin for use with ARDEX polyurethane screeds and self-smoothing epoxy floor coatings. Blind with ARDEX Fine Aggregate and used as a primer prior to applying thick applications of
the ARDEX Industrial Floor System, or other appropriate ARDEX cement-based products. Where surfaces are very porous, more than one coat of primer may be required
to achieve the desired bonding efficiency. For applications on new concrete or where the relative humidity (RH) of the substrate is in excess of 75%, ARDEX DPM should be used.
If the substrate is particularly smooth, the surface of the ARDEX R 2 E should be seeded with ARDEX Fine Aggregate immediately after application to give a mechanical key to facilitate the installation of resin screeds and toppings.
- Easy to apply
- For internal or external use
- Seals substrates and acts as an adhesive bridge
- For use with ARDEX polyurethane, epoxy, and cement-based system
TECHNICAL DATA ARDEX R 2 E
New, existing or rough screeded concrete
15 mins at 25ºC
Walkable in 5-6 hours at 25ºC
Approximately 40m2 per 10kg set (Part A: 6.7 kg / Part B: 3.3kg)